Start your IBM C2090-623 exam preparation with the latest C2090-623 dumps. The leads4pass C2090-623 dumps update the IBM C2090-623 training material with 60 new questions, and with it, you’ll easily pass the C2090-623 exam.

New C2090-623 dumps https://www.leads4pass.com/c2090-623.html Ensure that you are fully prepared to pass the IBM C2090-623 exam.

leads4pass – 100% real C2090-623 certification exam questions and answers

C2090-623 free dumps are questions from the latest full C2090-623 dumps. 

Question 1:

An administrator needs to address an environment that is not running optimally and conduct an architecture review.

Which performance attributes should be considered?

A. capacity, scalability, availability

B. gateways, application servers, Content Manager

C. IBM Cognos implementation, capacity, infrastructure

D. infrastructure, gateways, application servers, scalability

Correct Answer: C

Conduct an architecture review to assess the physical architecture and software installation. References: ftp://public.dhe.ibm.com/software/pdf/dk/service-shop/ IBM_Cognos_BI_Health_Check_Service_FINAL_10-21-11.pdf

---

Question 2:

An administrator sees that an environment has a long startup time and wants to remedy the issue.

Which solution should be used?

A. Set load balancing to cluster compatible.

B. Check the Fast Startup option under IBM Cognos Configuration.

C. Increase the size of the JVM heap by selecting Large configuration.

D. Reduce the size of the Content Store through archiving and removal.

Correct Answer: A

If your IBM Cognos servers operate within a load-balancing infrastructure, you can turn off the weighted round-robin format of load balancing for the dispatcher. Otherwise, load balancing may be duplicated by the cluster and by IBM Cognos software, which can degrade performance. You can set the dispatcher property named loadBalancingMode either to weightedRoundRobin or clusterCompatible. References: IBM Cognos Administration Version 10.1.0, Administration and Security Guide, page 163

---

Question 3:

An environment has twenty dispatchers. The administrator wants to change one property to the same

value for all dispatchers.

How can that be accomplished?

A. This can be accomplished if all dispatchers are put inside a folder.

B. This can be accomplished by changing the desired property for the configuration.

C. This cannot be accomplished unless the property value is changed for each dispatcher.

D. This can be accomplished by selecting all dispatchers at once and changing the desired property.

Correct Answer: A

Grouping dispatchers in configuration folders.

Configuration folders are useful to organize dispatchers if your installation includes many dispatchers. You

can group dispatchers so that you can apply the same configuration settings once to all the dispatchers

and services in the folder.

Note: You can have more than one dispatcher in your IBM Cognos environment. In such distributed

installations one dispatcher is configured for every instance of the Content Manager or Application Tier

Components that are installed and configured in your environment.

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/

com.ibm.swg.ba.cognos.ug_cra.doc/c_reportnet_components.html

---

Question 4:

An administrator wants to exclude Request level logging details from being captured. Which logging level must be set?

A. Basic logging level

B. Trace logging level

C. Verbose logging level

D. Request logging level is turned on by default

Correct Answer: A

The higher you set the logging level, the more it degrades system performance. Normally, you set the level to Minimal or Basic to collect errors, or to Request to collect errors and warnings.

Note: Report validation levels and logging levels Report validation level, Logging level Error: Minimal, Basic Warning: Request Key Transformation: Trace Information: Full

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/ com.ibm.swg.ba.cognos.ug_cra.doc/c_logginglevels.html

---

Question 5:

An administrator wants to render a report and ensure the completed HTML is sent back to the gateway.

Which service is responsible for the rendering task?

A. Report service

B. Delivery service

C. Presentation service

D. Content Manager service

Correct Answer: C

The Presentation service Transforms generic XML responses from another service into output format, such as HTML or PDF Provides display, navigation, and administration capabilities in IBM Cognos Connection

Incorrect Answers:

A: The Report service manages interactive requests to run reports and provides output for a user in IBM Cognos Connection or a studio.

B: The Delivery service sends emails to an external SMTP server on behalf of other services, such as the report service, job service, agent service, or data integration service

D: The Content Manager service: Performs object manipulation functions in the content store, such as add, query, update, delete, move, and copy Performs content store management functions, such as import and export

References: IBM Cognos Administration Version 10.1.0, Administration and Security Guide, page 139

---

Question 6:

The database containing the Content Store crashed. The administrator needs to restore the Content Store in its entirety including all of the configuration settings that were defined.

What must be done to recover the configuration settings?

A. The configuration settings are automatically included when running the import.

B. Manually apply the settings because configuration settings are not a part of the Content Store deployment.

C. Configuration settings are not included in the Content Store deployment. The parameter CM. DEPLOYMENT INCLUDE CONFIGURATION must be set to true on the ContentManagerService prior to running the Content Store export deployment.

D. Configuration settings are included in the Content Store deployment but not included in the import unless you set the parameter CM. DEPLOYMENT INCLUDE CONFIGURATION to true on the ContentManagerService before running the import.

Correct Answer: C

Specify if Configuration Objects and Children are Part of Deployment.

You can specify if configuration objects and their children are included as part of the deployment. By default,

they are not included.

You can change the default setting using the advanced setting

CM. DEPLOYMENT INCLUDES CONFIGURATION.

By default, it is set to False (do not include configuration objects in deployments).

To change the default to include configuration objects and their children, set it to True.

References: IBM Cognos Administration Version 10.1.0, Administration and Security Guide, page 384

---

Question 7:

An environment is configured to use Compatible Query Mode (CQM). Which statement is true about request flow?

A. OLAP, DMR, and Relational components reside in the same Adapters layer.

B. OLAP, UDA, and DMR components reside in the same Query Execution layer.

C. OLAP, Relational and DMR components reside in the same Query Planning layer.

D. OLAP, DMR, and Relational components reside in the same Query Execution layer.

Correct Answer: C

OLAP-style queries, like those against SAP BW, Oracle Essbase, and IBM Cubing Services type data sources, will go to the OLAP query planner. References: The IBM Cognos 10 Dynamic Query Cookbook (2010), page 7

---

Question 8:

A user needs to create a data module that uses a data source named MyDatabase. What actions must be taken to enable the user to access this data source?

A. Using Manage, click on Data servers, click on +, and choose the appropriate database type, name the connection “MyDatabase” and supply the appropriate connection details to connect to the data source.

B. Using New, click on Data Module, select Data servers, click on the + to add a new data server, choose the appropriate database type, name the connection “MyDatabase” and supply the appropriate connection details to connect to the data source.

C. Using Manage, click on Administration console, then click on “New Data Source” within the Data Source Connections option under the Configuration tab. Select the appropriate database type, name the data source “MyDatabase” and supply the appropriate connection details to connect to the data source.

D. Using Manage, click on Administration console, then click on “New Data Server” within the Data Source Connections option under the Configuration tab. Select the appropriate database type, name the data source “MyDatabase” and supply the appropriate connection details to connect to the data source.

Correct Answer: C

You can combine multiple sources into one data module. After you add a source, click Add sources (Add a

data source.) in Selected sources to add another source.

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/

com.ibm.swg.ba.cognos.ca_mdlg.doc/c_data_modules.html

---

Question 9:

An administrator needs to exclude users from rendering reports as PDF output.

How can this be enabled?

A. Modify the permissions for the generate PDF Output capability.

B. Use Theme Manager to remove the generate PDF Output option.

C. Create a role name “PDF output”, add the built-in entry group name “Everyone” and set the permission to Deny.

D. Modify the file located in \templates\ps\system.xml, locate the line “, and add the following attribute enabled=”false”.

Correct Answer: A

By default, all users have permissions for the following capabilities: Generate CSV Output Generate PDF Output Generate XLS Output Generate XML Output

These separately secured functions support the management of system resources. To control the formats options that users can see and run in the user interface, set access permissions for these capabilities.

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/ com.ibm.swg.ba.cognos.ug_cra.doc/c_specifyreportformat.html

---

Question 10:

An administrator created a Content Store export and included the user account information.

How can a listing of the content be exported?

A. Within the export, ensure the Recording level option is set to Trace.

B. By default when the Content Store is backed up, a full detailed listing is generated and available in the Logs folder.

C. Modify the Advanced settings on the ContentManagerService by adding the parameter CM.DeploymentDetailEntireContent with a value of true.

D. Modify the Advanced settings on the ContentManagerService by adding the parameter CM.DeploymentIncludeConfiguration with a value of true.

Correct Answer: D

You can specify if configuration objects and their children are included as part of the deployment. By default,

they are not included.

You can change the default setting using the advanced setting

CM. DEPLOYMENT INCLUDES CONFIGURATION.

By default, it is set to False (do not include configuration objects in deployments).

To change the default to include configuration objects and their children, set it to True.

Incorrect Answers:

C: The CM.DeploymentDetailEntireContent setting affects deployment history. By default, the information saved in deployment records includes the progress and summary reports only. If you want to include more detailed information, change the recording level using the advanced setting CM.DEPLOYMENTDETAILENTIRECONTENT.

References: IBM Cognos Administration Version 10.1.0, Administration and Security Guide, page 384

---

Question 11:

In a LifeCycle Manager Project, a user can create either a Benchmark task or a Comparison task. Which statement is INCORRECT when describing the application of Benchmark tasks?

A. Benchmark tasks can be used as a benchmark test for any LifeCycle Manager Project.

B. Benchmark tasks can be used to create a benchmark test to run Compatible Query Mode (CQM) reports as Dynamic Query (DQ) reports.

C. When creating a Benchmark task, the administrator can choose whether to validate reports before they are run, and whether to run the reports in Dynamic Query Mode (DQM).

D. To use a previously run Benchmark, select a previously created Benchmark task for the benchmark source and the target Cognos server that you want to compare to the benchmark.

Correct Answer: C

Incorrect Answers: B: You can run CQM reports in DQM in a Lifecycle Manager project as part of the CQM to DQM migration validation.

D: Users can compare live Cognos environments, or static files using previously saved Benchmark tasks. Benchmark allows you to create a point-in-time snapshot and use that as a baseline comparison.

Note: Lifecycle Manager is a stand-alone application that helps validate and compare report outputs within a single environment, between environments, or between different versions of Cognos.

References: https://www.ibm.com/communities/analytics/cognos-analytics-blog/cognos-lifecycle-managerenhancements-in-11-0-4/

---

Question 12:

Which statement is true about the Default User Profile?

A. It includes the option to disable hints.

B. It is used only for the initial login of a user.

C. A change will have an effect only after a user\’s next login.

D. It is defined in the IBM Configuration Portal, under the Dispatchers and Services section.

Correct Answer: A

Incorrect Answers:

B, C: When a tenant user logs on to IBM Cognos software for the first time, the user profile is automatically

created for the user. The profile is based on the tenant user profile, if one exists. If a tenant profile does not

exist, the default user profile is applied to the user.

The default user profile is defined in the Cognos namespace. It contains settings that apply to all new

users. You can edit the default user profile for your users to minimize the number of changes you need to

make to individual user profiles.

D: Procedure

1. In IBM Cognos Administration, click the Multitenancy tab.

2. Choose the applicable action:

3. To create the user profile for one or more tenants, select the tenant checkboxes, and click the Edit default user profile icon in the toolbar. If required, make changes to the different tabs.

4. To change an existing user profile for one tenant, from the tenant Actions drop-down menu, click Edit tenant user profile, and make the required changes on the different tabs.

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/ com.ibm.swg.ba.cognos.ug_cra.doc/t_asg_mt_userprofile.html

---

Question 13:

Which policy rule is defined by this statement?

“If a policy has not been explicitly defined for an IBM Cognos Analytics object, then the policy that is

applied to its parent object will be used to evaluate if the object can be accessed.”

A. Acquired policies

B. Group inheritance

C. Union of permissions

D. Traversing to view child entries

Correct Answer: D

Users must have at least traverse permissions for the parent entries of the entries they want to access. The parent entries include container objects such as folders, packages, groups, roles, and namespaces.

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/ com.ibm.swg.ba.cognos.ug_cra.doc/c_accesspermissions.html

---

Question 14:

An administrator would like to log the activity for a single user.

Which action is required?

A. Set the Report service logging to Trace.

B. Modify the ipfcogconfig.xml file in the bin64 directory.

C. Use the Remote Process service for Java Management Extensions (JMX).

D. Set the advanced parameter RSVP.REPORTUSER.LOG for the Report service.

Correct Answer: C

You can use logs to diagnose a problem that is occurring for one or more specific users. You enable and disable logging for specific users by using the Remote Process service for Java Management Extensions (JMX), a technology that supplies tools to manage and monitor applications and service-oriented networks. You connect to the JMX Remote Process service using the console executable that is provided with the Java JDK. References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/ com.ibm.swg.ba.cognos.ug_cra.doc/t_disableipfuser.html

---

Question 15:

An administrator needs to add users from multiple authentication providers to a single role. What needs to be done?

A. Log on to each of the namespaces before starting.

B. Add external namespaces to the Cognos namespace manually.

C. Add the users to a Cognos group, then add the group to the Cognos role.

D. Import the users to the Cognos namespace first, then add the users to the Cognos role.

Correct Answer: B

In the Cognos Analytics user interface, authentication providers are represented by namespaces. Cognos Analytics supports the following types of authentication providers: Active Directory Custom Java Provider IBM Cognos Series 7 LDAP OpenID Connect SAP SiteMinder

Authentication providers are configured in IBM Cognos Configuration, under the Security > Authentication category. After the provider, the namespace is added there, and the IBM Cognos service is restarted, the namespace name is displayed in Manage > Accounts, and users can log on to Cognos Analytics using that namespace.

References: https://www.ibm.com/support/knowledgecenter/en/SSEP7J_11.0.0/ com.ibm.swg.ba.cognos.ag_manage.doc/c_ca_external_namespaces.html

---

Write at the end,

With the latest C2090-623 dumps and the latest C2090-623 training materials, you should know how important it is for the IBM Cognos Analytics C2090-623 exam. So, use the leads4pass C2090-623 dumps https://www.leads4pass.com/c2090-623.html to prepare for the exam.